Things That are Required For Completion

Created by Valus Valoo
Oct 11, 2021
1 min read

Required Items

  • The idler suspension setup needs to be printed and tested.

  • Springs are needed in for the suspension and the belts.

  • We need something for extending and retracting the dragon.

  • The tracks need to be printed and tested with the idlers.

  • A Setup for the jaw needs to be made and tested.

  • The belt needs a design (perhaps we can use the same thing that the tracks use).

  • We need somewhere to put our team number.

  • The Electronics need to be programed and placed on the robot.

  • Motors need to be applied.

Decorative

  • The Skull needs to be printed at a larger size and then cleaned.

  • we need a rib cage to be placed over the belt not only for decoration but to ensure the shipping elements stay in.

  • the tracks should be printed with translucent red so that it is like blood.

  • some decorative plates need to be printed and placed on the base.

  • LED lights can be added.